Products
Polyester heaters
The etched heating element has superior heat transfer and exceptionally uniform heat output, which results in a faster warm-up cycle and longer life. Use this heater to cover large areas with uniform heat, for flat or gently curved surfaces. Etched foil polyester heaters can be designed and fabricated in many types of configurations to fit the size and shape required by your application.
settings
Max. element temperature
105 °C (221°F)
Technical data
Technical parameters and specifications of the product.
| Max. element temperature | 105 °C (221°F) |
| Min. element temperature | -60°C (-76°F) |
| Dielectric strength at 20°C AS per ASTM KV/mm | 175 |
| Thermal conductivity at 100 °C W/(m•K) | 0.16 |
| Moisture absorption as per ASTM D-570-63. (24h immersion at 23°C) | 0.8% |
| Waterproof as per IEC 335-1 sect. 15-16 | yes |
| Constant of dielectricity at 25°C, 50Hz | 3.3 |
| Bending radius, min. | 1 mm |
| Max. element width | 600 mm |
| Power density | 0,6 W/cm² |
| Resistance tolerance | As standard, ±10% of nominal.Tolerance down to ±2% available |
| Rated voltage | Up to 1000 V AC/DC single or 3 phase |
Downloads
Technical documentation of the product for consultation and integration into your projects.
Applications
De-icing equipment
Handlebar heaters
Rear-view mirrors
Battery heaters
Direct contact
forum
Talk to an engineer
Need a custom solution?
Our technical team advises you on integration requirements, tolerances and custom manufacturing.